Guys i need you help::::

02tahoe00preludeJC · **Joined:** Thu Aug 23, 2007 2:12 am **Posts:** 33

I have a 1993 ford probe GT. 140000 miles. But it is having a problem. It starts at the turn of the key and it runs as long as you want it to. but i will not drive. Whenever i try to put it into gear even reverse it starts grinding and wont go into gear. Its a 5 speed. CAN ANYONE HELP ME????

reddog2009 · **Joined:** Tue Apr 08, 2008 1:21 pm **Posts:** 13

you may need a clutch or a master cylinder. i have this problem with my honda prelude.

chriszibble · **Joined:** Sun May 31, 2009 9:00 pm **Posts:** 68

Check your synchronizers. If its grinding trying to go into gear
thats probably your problem

zuker87 · **Joined:** Mon Sep 29, 2008 11:01 am **Posts:** 4

CLUTCH

piercings4_u · **Joined:** Wed Jun 10, 2009 7:28 pm **Posts:** 11

sounds like it could be your syncros but first if it is a hydraulic clutch i would check to see if you are low on fluid. i had this problem on a 94 ford ranger. it grinded everytime i tried to put it in any gear when it was out of fluid. check it and if its out then look for the leak. hope this helps.

JonB · **Joined:** Sun Jan 14, 2007 8:00 pm **Posts:** 2

I have a probe gt with everything you need it has new clutch and everything else just blew the motor up but will sell you the car cheap lemme me know what you think you can text me anytime at 9013373714 my name is Jon

amandakay · **Joined:** Mon Nov 16, 2009 1:12 pm **Posts:** 5

i have the 5speed trans used with new clutch setup in a car i will sell you the whole car for 350

Duddles · **Joined:** Sun Nov 16, 2008 6:43 am **Posts:** 2

thats in ur slave cylinder

Peabody52 · **Joined:** Sat Apr 04, 2009 3:06 pm **Posts:** 1

check your fluid then i would take the inspection plate off to see if the clutch is gone or not. then i would get into the syncros

Mautofied Community

Guys i need you help::::

Who is online